VT-VZ
V8, LS1 & LS2 
$790+GST
The ultimate Holden intake, normal Over
The Radiator Cold Air Intakes for Holden engines have always had one draw
back, the filter size at around 1/3 the size of the factory fitted filter
and around 1/4 of the size recommended by K&N for a 5700cc engine its
always been the weak point, that is until now. This new design uses a
filter size recommended for these engines, and with a larger filter
collection area open to direct air flow there is also more ram air effect
helping improve intake charge.
Made to the highest standards
this quite simply is the best intake available for your LS powered Holden.
They are a direct bolt in fit for VY-VZ
LS1 - LS2 & can be fitted to the VT-VX with modifications to the radiator
and air con condenser, 100mm silicon hose is required for fitting and is
available at an extra $50. VZ will also require a new intake air temp
sensor and plug which is available for $130.
Graph shows a stock VY running on
95 fuel with no other mods getting a Massive 28kw gain in power and 53Nm
of torque at the engine, with the air flow meter in place. |
